THERMOMIST 2000
TM2000-oil, gas only

• For homes up to 5,000 square feet.
• Adjustable.
• Heat activated.
• Versatile Installation.

The TM2000 uses fresh water and is connected directly to your fresh water supply. It is temperature activated for automatic, worry-free operation.

When the temperature rises inside the plenum, the TM2000 is activated, releasing a fine mist into the ductwork. The heated air is thus "humidified" and spreads the humidity throughout the house via the ductwork. When the furnace is deactivated and the temperature falls in the plenum, the TM2000 is idled until the cycle begins again.

The TM2000 features a sensitivity dial so you can customize the humidifier operation to suit your needs. The sensitivity dial varies the on/off cycle of the humidifier, thus providing more or less spray during the heating cycle.

The spray atomizing nozzle is a separate component and can be installed in the best location for optimal evaporation, while the control box can be installed in a more convenient location closer to the heat source.

The TM2000 is designed for use with oil or gas forced air heating systems and is not recommended for use with heat pumps. The standard nozzle is designed for homes up to 3,000 square feet. An optional nozzle is available for homes up to 5,000 square feet. We also offer an optional humidistat control.

Mount control box and nozzle to ductwork.

Connect saddle valve to cold water supply.

Plug into household current.